1.    CLOSE all doors.

2.    Insert key into ignition and leave in the OFF position.

3.    Locate the OBD port, see www.wikiobd.com for location information or download the app from the Google Play or Apple IOS Stores.

4.    Ensure there are contacts in terminals 4 and 8.

5.    Connect terminal 4 and 8 together with a suitable wire.

6.    The vehicle will LOCK and UNLOCK the doors to indicate programming mode has been selected.

7.    Switch ignition ON.

8.    The doors will LOCK.

9.    PRESS and HOLD the LOCK and UNLOCK buttons together for up to 30 seconds on the first remote transmitter.

10. The vehicle will UNLOCK the doors.

11. RELEASE the buttons.

12. Within 1 minute repeat step 9 to 11 for any additional remote transmitters.

13. REMOVE the OBD terminal wire.

14. Check ALL remote transmitters for operation.