1995 > 1995
NOTE :
If the ignition key is in the ON
position during programming, then the horn is disabled.
NOTE :
If the ignition key is in the OFF
position during programming, then the horn is enabled.
NOTE :
The horn will sound when the LOCK
button is pressed 2 times.
NOTE :
All remote transmitters must be programmed at this time, otherwise they will
not work.
1. Short pin 4 to pin 8 of the OBD/DLC Diagnostic
Connector.
2. Locate the OBD port, see www.wikiobd.com
for location information or download the app from the Google Play or Apple IOS
Stores.
3. The doors will LOCK and UNLOCK and operate the liftgate window release if fitted within 2 seconds.
4. PRESS and HOLD the LOCK and UNLOCK buttons at the same time on the 1st remote
transmitter until the locks cycle from LOCK
to UNLOCK.
5. Repeat step 3 for ALL remote transmitters to be programmed.
6. Remove the link from the OBD/DLC connector.
7. LOCK and UNLOCK the doors to
check each remote transmitter is operational.
8. Activate the rear window release to ensure it is functional.