1.    CLOSE all doors.

2.    INSERT key into ignition and switch ON.

3.    TURN key to OFF and REMOVE from ignition.

4.    PRESS the driver side power door lock switch to UNLOCK position and HOLD in the UNLOCK position.

5.    INSERT the key into ignition and remove. DO NOT turn.

6.    INSERT the key into ignition and remove. DO NOT turn.

7.    INSERT key into ignition for the THIRD time and LEAVE. DO NOT turn.

8.    RELEASE the power door lock switch.

9.    The vehicle will sound 3 BEEPS to confirm programming mode.

10.  PRESS the LOCK and UNLOCK buttons on the keyless entry transmitter together and HOLD until the vehicle BEEPS TWICE to confirm programming.

11.  REPEAT step 10 for additional remote transmitters.

12.  REMOVE key from ignition.

13. Check all remotes for operation.

NOTE : Maximum 4 remote transmitters can be programmed.