NOTE : Locate the keyless entry program line - a dark green wire with a molded plastic insulator on the end. The program line is located in the upper edge of the passenger side cowl trim panel.

1.    CONNECT the program line from the Remote Keyless Entry Module to GROUND with a suitable jumper wire.

2.    INSERT the key into the ignition and switch ignition switch to the ON position.

3.    PRESS any button on the remote transmitter to be programmed.

4.    The LOCKS will LOCK and UNLOCK to confirm programming.

5.    PRESS any button on the next remote transmitter to be programmed.

6.    The LOCKS will LOCK and UNLOCK to confirm programming.

7.    DISCONNECT the program line from ground.

8.    SWITCH ignition OFF and remove key.