NOTE : All remote transmitters must be programmed at the same time.

NOTE  : A maximum of 4 remote transmitters can be programmed.

NOTE : All remote transmitters will be erased once programming mode has bee enable.

1.    Remove the ignition key from the ignition lock.

2.    Remove the BCM PRGRM fuse from the fuse box.

3.    CLOSE all DOORS.

4.    CLOSE the LIFTGATE.

5.    Turn ignition to ACC position.

6.    Turn ignition to OFF position and then to ACC position within 1 second.

7.    OPEN and CLOSE any door, a chime will sound when the vehicle enters programming mode.

8.    PRESS and HOLD the remote transmitters LOCK and UNLOCK buttons together for 14 seconds.

NOTE : After 7 seconds a CHIME will sound, ignore and wait for the second CHIME around 14 seconds.

9.    Repeat step 8 for all remote transmitters to be programmed.

10.  Remove ignition key.

11.  Replace the BCM PRGRM fuse.