NOTE : All remote transmitters must be programmed at this time, otherwise they will not work.

1.    Short pin 4 to pin 8 of the OBD/DLC Diagnostic Connector.

2.    Locate the OBD port, see www.wikiobd.com for location information or download the app from the Google Play or Apple IOS Stores.

3.    SWITCH ignition to the ON position.

4.    The doors will LOCK and UNLOCK to confirm programming mode.

5.    PRESS any button on the 1^st remote transmitter until the locks cycle from LOCK to UNLOCK and activate the rear window release.

6.    Repeat step 5 for ALL remote transmitters to be programmed.

7.    Remove the link from the OBD/DLC connector.

8.    LOCK and UNLOCK the doors to check each remote transmitter is operational.