1993 > 1996
1. REMOVE the glove box.
2. ENSURE ignition is switched ON
during programming.
3. PRESS the PROGRAM SWITCH on the RKE MODULE ONCE.
NOTE : RKE module is located
behind the glove box.
NOTE : ALL existing remote transmitters will be ERASED at this point.
4. The RKE module will LOCK and UNLOCK the doors to CONFIRM
programming MODE.
5. Within 10 seconds PRESS any button on the 1st remote transmitter to be
programmed.
6. The doors will LOCK and UNLOCK to confirm remote transmitter is
programmed.
7. REPEAT step 5 and 6 for additional remote transmitters.
8. WAIT for 10 seconds after the
last remote transmitter has been programmed, and SWITCH ignition OFF.
9. Check all remote transmitters for correct operation.