Back Home
  • Procedure

1.    Locate the RKE programming connector behind the drivers dash area, near the RKE module.

 

2.    It should have 2 connection, RED and should not be plugged into anything else.

 

3.    Connect the 2 terminals together using a suitable jumper cable or connection.

 

4.    The Remote Keyless Entry module will cycle the locks from LOCK to UNLOCK to confirm programming mode.

 

5.    PRESS the ANY button on the first remote transmitter to be programmed.

 

6.    The doors will cycle LOCK to UNLOCK to confirm programming.

 

7.    Repeat for any additional remote transmitters.

 

8.    REMOVE the jumper from connector.

 

9.    Check all remote transmitters for operation.

 

Report Issue