NOTE : This procedure programs the RKE part of the integrated key/remote transmitter and does not program the transponder part which requires special equipment.

1.    Ensure all remote transmitters are available before you start, any not programmed will be erased.

2.    Switch ignition ON.

3.    Locate the Driver Information Centre (DIC) controls.

4.    PRESS the TRIP/FUEL button until the display shows CUSTOMISE OPTIONS.

5.    PRESS the thumb wheel to enter.

6.    USING the thumb wheel scroll to REMOTE KEYS and PRESS ENTER.

7.    SELECT PROGRAM then ENTER.

8.    Follow the DIC display prompts when to PRESS the LOCK and UNLOCK buttons at the same time for all remote transmitters being programmed.

9.    The system will BEEP TWICE to confirm remote transmitter is programmed.

10.  Switch ignition OFF.

11.  Check all remote transmitters for operation.