1.    Ensure the ignition is OFF.

2.    Locate the RKE programming connector behind the passenger side instrument panel, accessed by opening glove box. Removal of the inner tray of the glove compartment will be required.

3.    It should have 2 connections and should not be plugged into anything else, and removal of the vehicle trim maybe necessary.

4.    Connect the 2 terminals together using a suitable jumper cable or connection.

5.    The Remote Keyless Entry module will cycle the locks from LOCK to UNLOCK to confirm programming mode.

6.    PRESS the UNLOCK button on the first remote transmitter to be programmed.

7.    The doors will cycle LOCK to UNLOCK to confirm programming.

8.    Repeat for any additional remote transmitters.

9.    REMOVE the jumper from connector.

10.  Check all remote transmitters for operation.