Back Home
  • Procedure

1.    Switch the ignition ON.

 

2.    Between 1 and 4 seconds and PRESS the POP UP button on the remote transmitter while aiming the transmitter at the TRUNK.

 

3.    Between 1 and 4 seconds, switch the ignition OFF.

 

NOTE : Keep the timing between 1 and 4 seconds, too fast or too slow will cause the control unit to lose the codes.

 

4.    Between 1 and 4 seconds, switch the ignition ON.

 

5.    Between 1 and 4 seconds, PRESS the trunk POP UP button on the transmitter while aiming the transmitter at the trunk.

 

6.    Between 1 and 4 seconds, switch the ignition OFF.

 

7.    Between 1 and 4 seconds, switch the ignition ON.

 

8.    Between 1 and 4 seconds, PRESS the POP UP button on the transmitter while aiming the transmitter at the trunk.

 

9.    Between 1 and 4 seconds, switch the ignition OFF.

 

10. Between 1 and 4 seconds, switch the ignition ON.

 

11.  Between 1 and 4 seconds, PRESS the POP UP button on the transmitter while aiming the transmitter at the trunk.

 

12.  Leave the ignition switch ON.

 

13.  Within 15 seconds, aim each remote transmitter (up to three) to be stored at the trunk and PRESS the POP UP button ONCE on each transmitter.

 

14. Between 1 and 4 seconds, switch the ignition OFF.

 

15.  CHECK all remote transmitters for correct operation.

Report Issue