1.    CLOSE all doors.

2.    Insert key into ignition and turn to the RUN position. Wait for the CHIMES to stop.

3.    Using a working Programmed Remote Transmitter PRESS and HOLD the UNLOCK button for between 4 and 10 seconds.

4.    At the same time, between 4 and 10 seconds PRESS the PANIC button for 1 second and then RELEASE both buttons.

5.    After 3 seconds a CHIME will sound to indicate programming mode has been selected.

6.    Within 30 seconds of the CHIME, using the same remote transmitter PRESS and RELEASE the UNLOCK button to program.

7.    A CHIME will sound to CONFIRM programming.

8.    Now REPEAT step 6 and 7 for all additional remote transmitters.

9.    Switch ignition OFF and remove the key.

10.  Check ALL remote transmitters for operation.