1.    Locate the DRIVER INFORMATION CENTRE buttons.

2.    Insert the key into the ignition and turn ignition ON.

3.    PRESS the vehicle information button until PRESS þ TO RELEARN REMOTE KEY is displayed.

4.    PRESS the SET/RESET button until REMOTE KEY LEARNING ACTIVE is displayed.

5.    PRESS and HOLD the LOCK and UNLOCK buttons on the first remote transmitter at the same time for 15 seconds.

6.    A CHIME will sound to indicate programming is successful.

7.    Repeat step 5 and 6 for additional remote transmitters.

8.    To exit programming cycle the ignition key to LOCK.

NOTE : For vehicles without a Driver Information Centre (DIC) follow procedure below :-

1.    Ensure vehicle is in PARK and the ignition is ON.

2.    PRESS the odometer reset stem until RELEARN REMOTE KEY is displayed on the instrument/dashboard cluster.

3.    PRESS and HOLD the trip odometer stem for 3 seconds.

4.    The message REMOTE KEY LEARNING ACTIVE will be displayed on the dashboard/instrument cluster.

5.    PRESS and HOLD the LOCK and UNLOCK buttons on the first transmitter together for 15 seconds.

6.    A CHIME will sound to indicate programming is successful.

7.    Repeat step 5 and 6 for additional remote transmitters.

8.    To exit programming cycle the ignition key to LOCK.

NOTE : Maximum of 8 remote transmitters can be programmed.