SPARE KEY PROGRAMMING PROCEDURE

1.    INSERT RED key into the ignition and SWITCH ignition ON.

NOTE : The immobiliser light should be ON for 1 second and go OFF.

2.    START the engine.

3.    SWITCH engine OFF and REMOVE the RED key.

NOTE : The immobiliser light will FLASH after 30 seconds.

4.    INSERT the RED key into the ignition and SWITCH ON and then OFF and REMOVE the key within 5 seconds.

5.    INSERT the BLACK key into the ignition and SWITCH ON within 5 seconds.

6.    With the immobiliser light still flashing SWITCH the ignition back to OFF and then REMOVE the BLACK key.

7.    Wait for the immobiliser light to STOP flashing. It should stop 5 seconds after removing the black key.

8.    Check the BLACK key for operations.

NOTE : REPEAT procedure for additional keys.