2013 > 2016
SPARE
KEY PROGRAMMING PROCEDURE
1.
INSERT RED key into the ignition and SWITCH
ignition ON.
NOTE : The immobiliser light should be ON
for 1 second and go OFF.
2. START the engine.
3. SWITCH engine OFF and REMOVE the RED key.
NOTE : The immobiliser light will FLASH
after 30 seconds.
4. INSERT the RED key into the
ignition and SWITCH ON and then OFF and REMOVE the key
within 5 seconds.
5. INSERT the BLACK key into the
ignition and SWITCH ON within 5 seconds.
6. With the immobiliser light still flashing SWITCH the ignition back to OFF
and then REMOVE the BLACK key.
7. Wait for the immobiliser light to STOP
flashing. It should stop 5 seconds
after removing the black key.
8. Check the BLACK key for
operations.
NOTE : REPEAT procedure for additional keys.