NOTE : Ensure all remote transmitters are available before you start programming procedure.

NOTE : ALL existing remote transmitters will be erased.

1.    Enter the vehicle and close ALL doors and LOCK all doors using the drivers door lock switch.

2.    INSERT and REMOVE the key from the ignition more than 6 times within 10 seconds.

NOTE : Do not turn key.

3.    The HAZARD/WARNING lights should FLASH in the instrument panel.

4.    Within 5 seconds insert key into ignition and turn to the ACC position.

5.    Within 5 seconds PRESS any button on the first remote transmitter to be programmed for 1 second.

6.    The HAZARD/WARNING lights should FLASH once to confirm programming.

7.    To program additional remote transmitters UNLOCK and then LOCK the doors using the drivers door switch and within 5 seconds PRESS any button on the next remote transmitter for 1 second.

8.    The HAZARD/WARNING lights should FLASH once to confirm programming.

9.    Repeat steps 7 and 8 for any additional remote transmitters.

NOTE : Maximum 4 remote transmitters can be programmed.

10.  Turn ignition OFF and remote key.

11.  Unlock the doors, and open and close drivers door.

12.  Check all remote transmitters for operation.