NOTE :  Make sure the drivers door is OPEN and UNLOCKED and the key is out of the ignition.

 

1.    Insert and remove the key from the ignition.

 

2.    Close and open the drivers door twice within 40 seconds.

 

3.    Insert the key into the ignition and remove it again.

 

4.    Close and open the drivers door twice within 40 seconds again.

 

5.    Close the door.

 

6.    Insert the key into the ignition.

 

7.    Turn the ignition switch from LOCK to ON and back to LOCK at about 1 second intervals

to select the desired mode :-

 

NOTE : 1 time for ADD.

NOTE : 2 times for REWRITE.

NOTE : 3 times for CONFIRMATION.

NOTE : 5 times for PROHIBITION.

 

8.    Remove the key from the ignition.

 

9.    To confirm your selection of all mode except CONFIRMATION mode, the power locks

will now cycle LOCK to UNLOCK a number of times corresponding to your key cycles

in step 7.

 

NOTE : If CONFIRMATION mode has been selected, the power door locks will now cycle

(in 2 seconds intervals) a number of times corresponding to the number of transmitters currently

registered.

 

NOTE : Opening the door will complete the procedure.

 

NOTE : If PROHIBITION mode has been selected opening the door will complete the procedure.

 

11.  For ADD or REWRITE modes, within 25 seconds of Door Lock confirmation:

 

(a) While pressing the LOCK button of the wireless transmitter, press the UNLOCK switch 5 times.

(b) Press the LOCK switch once.

(c) If the transmitter has been successfully programmed, the power locks will cycle LOCK to UNLOCK

once at this time. If there is no such operation, return to step 1.

(d) If multiple transmitters are to be programmed, repeat the above steps (a) to (c).

 

12.  Open the drivers door to complete the procedure.