RADIO FREQUENCY (RF) 3 BUTTON PROCEDURE

NOTE : Maximum of 4 remote transmitters can be programmed.

1.    Switch ignition from position 0 to II then switch ignition from II to I and back to II 4 times within 3 seconds.

2.    A sound should be heard to indicate programming mode.

3.    Switch ignition back to position 0.

4.    PRESS and HOLD any button on the first remote transmitter until a sound is heard.

5.    REPEAT step 4 for all additional remote transmitters within 2 seconds of each programming sound.

6.    Switch ignition to position II and back to 0 to complete procedure.

7.    Check all remote transmitters for operation.