1.    OPEN Drivers door.

2.    Operate Headlight lever in Flash High beam Position and HOLD.

3.    Insert Key into Ignition and turn to AC position

4.    Vehicle should make a Chime. L.E.D. should flash.

5.    Operate Headlight lever to Flash High Beam position 5 times.

6.    Vehicle should make a chime. L.E.D. should flash.

7.    Now the vehicle is in program mode.

8.    PRESS buttons on each remote control to be programmed, vehicle should CHIME and L.E.D should should flash for each Remote control programmed.

9.    Switch ignition OFF and remove key.

10. Close drivers door.

11. Check operation of all remote controls.