2001 > 2006
1. battery 2032.
PROGRAMMING
3 BUTTON REMOTE KEYS
1. Make sure all doors are closed.
2. PRESS and HOLD the UNLOCK button on the first remote
control key and press the central locking
Button
3 times while HOLDING the UNLOCK button.
3. Release the UNLOCK button at the same time as the final press of the
central locking button.
4. Repeat step 2 and 3 for the second remote control key.
5. Test all remote keys for operation.
PROGRAMMING
2 BUTTON REMOTE KEYS
NOTE : Can only be programmed using diagnostic equipment.
RESYNCRONISATION
OF PROGRAMMED KEYS
1. Ensure all doors are closed.
2. Insert a key into the ignition and turn to the ACC position once and
remove the key.
3. Within 5 seconds HOLD the UNLOCK button and press the LOCK button
3 times then release UNLOCK button.
4. The doors should LOCK and UNLOCK.
5. Repeat step 3 for any other keys that require syncronisation.
6. Open the doors and insert ignition key to complete programming, and test
all remote keys for operation.