PROGRAMMING 3 BUTTON REMOTE KEYS

1.    Make sure all doors are closed.

2.    PRESS and HOLD the UNLOCK button on the first remote control key and press the central locking

Button 3 times while HOLDING the UNLOCK button.

3.    Release the UNLOCK button at the same time as the final press of the central locking button.

4.    Repeat step 2 and 3 for the second remote control key.

5.    Test all remote keys for operation.

PROGRAMMING 2 BUTTON REMOTE KEYS

NOTE : Can only be programmed using diagnostic equipment.

RESYNCRONISATION OF PROGRAMMED KEYS

1.    Ensure all doors are closed.

2.    Insert a key into the ignition and turn to the ACC position once and remove the key.

3.    Within 5 seconds HOLD the UNLOCK button and press the LOCK button 3 times then release UNLOCK button.

4.    The doors should LOCK and UNLOCK.

5.    Repeat step 3 for any other keys that require syncronisation.

6.    Open the doors and insert ignition key to complete programming, and test all remote keys for operation.