1.    Confirm that all the doors are CLOSED and the ignition key is out of the ignition.

2.    Open drivers door, insert the key, switch ON the ignition within 10 seconds.

3.    Turn the ignition OFF within 10 seconds. REMOVE KEY FROM IGNITION.

4.    PRESS and RELEASE the drivers door switch 3 times within 20 seconds.

5.    Turn the ignition ON within 10 seconds.

6.    Turn the ignition OFF 10 seconds. REMOVE KEY FROM IGNITION.

7.    Press and hold both LOCK and UNLOCK buttons on the remote for more than 5 seconds within 20 seconds. All the doors will LOCK/UNLOCK to confirm that this process has been completed.

8.  Press LOCK or UNLOCK button on the transmitter within 5 seconds, the doors will LOCK/UNLOCK to confirm that this process has stored the remote.

9.  If you want to program the additional transmitter, repeat the entire procedure.

NOTE : Up to 2 remotes may be programmed.