1.    Enter 5 digit permanent entry code into the keyless entry keypad.

2.    Within 5 seconds of pressing the final digit, press the 1-2 button.

3.    All doors will LOCK and then UNLOCK to confirm programming mode.

4.    Press any button on the first remote transmitter within 5 seconds of pressing the 1-2 button.

5.    The door locks will LOCK and UNLOCK to confirm successful programming.

6.    Press any button on the next remote transmitter to be programmed within 5 seconds of the previous step.

7.    The door locks will LOCK and UNLOCK to confirm successful programming.

8.    Repeat for up to 4 transmitters.

9.    Press the 7-8 and 9-0 buttons simultaneously to exit programming mode.

NOTE : If the keypad light goes out before programming is completed, you must start again.