1992 > 1999
1. Maximum 4 Remote transmitters
1. Switch ignition to RUN or ACC
2. Connect pins together for entire procedure in the programming connector
located at the base of the steering column.
3. The doors will LOCK and then UNLOCK to confirm programming mode.
4. Press any button on the first remote transmitter to be programmed.
5. The doors will LOCK and then UNLOCK to confirm remote transmitter is
programmed.
6. Press any button on the second remote transmitter to be programmed.
7. The doors will LOCK and then UNLOCK to confirm remote transmitter is
programmed.
8. Repeat for up to 4 remote transmitters.
9. Switch ignition OFF.
10. The doors will LOCK and then UNLOCK to confirm programming mode is closed.
11. Remove short circuit on
programming connector.