1.     Switch ignition to RUN or ACC

2.    Connect pins together briefly in the programming connector located in the LR quarter panel area.

3.    The doors will LOCK and then UNLOCK to confirm programming mode.

4.    Press any button on the first remote transmitter to be programmed.

5.    The doors will LOCK and then UNLOCK to confirm remote transmitter is programmed.

6.    Press any button on the second remote transmitter to be programmed.

7.    The doors will LOCK and then UNLOCK to confirm remote transmitter is programmed.

8.    Repeat for up to 4 remote transmitters.

9.    Switch ignition OFF.

10. The doors will LOCK and then UNLOCK to confirm programming mode is closed.