1.     Switch ignition from OFF to ON 8 times within 10 seconds.

2.    On the 8^th time, finish with the ignition ON.

3.    Doors will LOCK and UNLOCK to confirm programming mode is enabled.

4.    Within 20 seconds PRESS any button on the 1^st remote transmitter being programmed.

5.    Doors will LOCK and UNLOCK to confirm remote transmitter is programmed.

6.    Within 20 seconds PRESS any button on the 2^nd remote transmitter being programmed.

NOTE : Repeat step 6 for up to 4 remote transmitters.

7.    Switch ignition OFF.

8.    Door locks will cycle LOCK to UNLOCK to end programming mode.