NOTE : Maximum of 3 remote transmitters can be programmed.

1.    Switch ignition ON.

NOTE : Point remote control transmitter at the central locking control module located behind the right hand side kick panel.

2.    Within 4 seconds press the LOCK or UNLOCK button of the first remote transmitter.

3.    Within 4 seconds switch ignition OFF.

4.    Within 4 seconds switch ignition ON.

5.    Within 4 seconds switch ignition OFF.

6.    Within 4 seconds switch ignition ON.

7.    Within 4 seconds switch ignition OFF.

8.    Within 4 seconds switch ignition ON.

9.    Within 4 seconds press the LOCK or UNLOCK button on the first remote transmitter.

10.  The doors will LOCK and UNLOCK once indicating programming mode.

11. Within 10 seconds press the LOCK or UNLOCK button on the each remaining remote transmitter.

12. The doors will LOCK and UNLOCK for each remote transmitter programmed.

13.  Switch ignition OFF.

14.  Check operation of all remote transmitters.