1.    OPEN drivers door.

2.    Switch Ignition ON, then remove key.

3.    PRESS and release drivers side door light switch 3 times or CLOSE and OPEN the drivers door 3 times.

4.    Switch Ignition ON, then remove key.

5.    All doors should LOCK and UNLOCK to indicate programming mode.

6.    Press UNLOCK on remote control to program.

7.    All doors should LOCK and UNLOCK to indicate programming has been successful.

NOTE : To program additional remotes repeat the whole procedure.

NOTE : Remotes are not deleted during the programming procedure unless the MAX number of remotes is reached, then the oldest remote is overwritten.