CODEALARM RKE SYSTEM

NOTE : Transmitter Module Location :-

            All models below steering wheel, behind Knee rest panel.

            For Diamante 1997-1998 passenger side base of A pillar

1.    Locate the programming button in the RKE harness close to the RKE Transmitter Module.

2.    OPEN the drivers door and leave OPEN.

3.    Turn the ignition key to the ON position.

4.    PRESS and HOLD the programming button for 15 seconds, keep HOLDING the button.

5.    The doors will LOCK and UNLOCK 3 times.

6.    Still HOLDING the button press the 1 or LOCK button on the first remote transmitter.

7.    The doors will LOCK and UNLOCK.

8.    Still HOLDING the button press the 1 or LOCK button on the second remote transmitter.

9.    The doors will LOCK and UNLOCK.

10.  Release programming button.

11.  Turn ignition OFF.

12.  Check all remote transmitters for correct operation.