1995 > 1998
OMRON
RKE SYSTEM
NOTE :
Receiver module location :
Expo
LRV = Behind rear quarter panel at C pillar, above rear wheel well driver side
Expo
= Behind rear quarter panel at C pillar, above rear wheel well passenger side
Montero
= Behind rear quarter panel, forward of passenger side rear light cluster.
Diamante
= Under rear shelf trim.
Galant = Under
rear shelf trim.
3000GT
= Behind rear quarter trim panel on driver side, near left speaker.
1. With ignition OFF connect
pins 1 and 4 of the OBD port
together using a suitable jumper cable.
2. Close all doors, trunk/boot and bonnet/hood.
NOTE :
OBD socket locations can be found
here www.wikiobd.co.uk
3. Turn ignition to ACC position
and then back to OFF.
4. The doors should LOCK and UNLOCK to indicate programming mode.
5. Press any button on the first remote transmitter slowly 3 times within 10 seconds.
6. The doors should LOCK and UNLOCK to confirm remote transmitter is
programmed.
7. Repeat step 5 for all remote
transmitters to be programmed.
8. Disconnect jumper from OBD
and remove ignition key.
9. Test all remote transmitters for operation.