2000 > 2002
RS3200
(TVIP)
DEALER
FITTED REMOTE KEYLESS ENTRY PROGRAMMING
NOTE : Maximum of 4 remote
transmitters can be programmed.
NOTE : When a new remote
transmitter it will be programmed in normal mode, additional options for this
system
can be setup by referring to the main operating manual of this system.
1. Open the drivers door and remove the ignition
key.
2. The programming steps must be performed within 40 seconds.
3. Insert the key into the ignition 2
times.
4. Close then open the drivers door 2 times.
5. Insert the key into the ignition 1
time.
6. Close then open the drivers door 2 times.
7. Insert the key into the ignition and leave it in.
8. Close the drivers door.
9. Turn the ignition key from LOCK
to ON, and then back to LOCK position.
10. Remove the key.
11. The tail/rear lights will flash once, the sounder will sound once and
the doors will LOCK and UNLOCK.
12. Press the LOCK and UNLOCK button once together on the
remote transmitter to be programmed.
13. Press the LOCK button on the
remote transmitter.
14. The tail/rear lights will flash once, the sounder will sound once and
the doors will LOCK and UNLOCK.
15. Repeat steps 12 to 14 for any additional remote transmitters.
16. Open the drivers door.
TO
ERASE AND PROGRAM EXISTING REMOTE TRANSMIITERS
1. Open the drivers door and remove the ignition
key.
2. The programming steps must be performed within 40 seconds.
3. Insert the key into the ignition 2
times.
4. Close then open the drivers door 2 times.
5. Insert the key into the ignition 1
time.
6. Close then open the drivers door 2 times.
7. Insert the key into the ignition and leave it in.
8. Close the drivers door.
9. Turn the ignition key from LOCK
to ON, and then back to LOCK position 2 times.
10. REMOVE the key.
11. The tail/rear lights will flash
once, the sounder will sound once and the doors will LOCK and UNLOCK.
12. PRESS the LOCK and UNLOCK button once together on the
remote transmitter to be programmed.
13. PRESS the LOCK button on
the remote transmitter.
14. The tail/rear lights will
flash once, the sounder will sound once and the doors will LOCK and UNLOCK.
15. Repeat steps 12 to 14 for
any additional remote transmitters.
16. OPEN the drivers door.
17. LOCK and UNLOCK the
doors using the drivers door LOCK button 5 times.
18. Insert key into ignition and
turn to the ON position 2 times, then remove the key.
19. LOCKS should cycle from LOCK
to UNLOCK to confirm programming.
20. Press the LOCK and UNLOCK button together on the remote transmitter for 1 second.
21. The LOCKS should cycle LOCK to UNLOCK to confirm programming.