CODEALARM SYSTEM

PROGRAMMING

1.    OPEN the drivers door.

2.    Switch ignition ON.

3.    PRESS and HOLD the programming button, located under the dashboard facia.

4.    After HOLDING for 15 seconds the door locks will cycle from LOCK to UNLOCK 3 times.

5.    KEEP HOLDING the programming button.

6.    PRESS the LOCK button on each of the remote transmitters to be programmed.

7.    The doors will LOCK and UNLOCK for each remote transmitter programmed.

8.    Release the programming button to end programming mode.

9.    Switch ignition OFF.

10.  Check all remotes for correct operation.