NOTE : Maximum of 4 remote transmitters can be programmed.

1.    Switch ignition from position 0 to ON 6 times within 10 seconds.

2.    Switch ignition OFF, but leave key in ignition.

3.    After 2 seconds the vehicle will enter programming mode and will flash the warning lights twice.

4.    PRESS and HOLD the UNLOCK button on the first remote transmitter, and PRESS the LOCK button 3 times.

5.    RELEASE the UNLOCK button.

6.    The warning lights will flash once to confirm remote transmitter is programmed.

7.    Repeat steps 4 to 6 for additional remote transmitters.

8.    Once complete, switch ignition ON and warning lights will flash 2 times.

9.    Check all remote transmitters for operation.