1.    Ensure the doors lock and unlock using the key.

2.    With ignition OFF connect pins 1 and 4 of the OBD connector together using a suitable jumper pin.

3.    Within 10 seconds of connecting the jumper switch ignition from OFF to ACCESSORY 3 times within 2 seconds.

4.    The doors will LOCK and UNLOCK.

5.    PRESS the LOCK or UNLOCK button on the first remote transmitter 3 times within 10 seconds of the first press.

6.    The doors will LOCK and UNLOCK.

7.    Repeat step 5 for additional remote transmitters.

8.    REMOVE Jumper connection.

9.    Check all remote transmitters for correct operation.

NOTE : ALL remote transmitters must be programmed within 1 minute of entering the programming mode.

NOTE : Programming mode will end when 4 transmitters are programmed, Jumper is disconnected or Ignition is switched ON.