2000 > 2002
PROGRAMMING
1. Switch ignition ON.
2. With a working remote transmitter PRESS and HOLD the UNLOCK button
for between 4 and 10 seconds, with button still pressed PRESS the PANIC button.
3. A chime will be heard to indicate
programming mode.
4. PRESS any button on the new remote transmitter
to be programmed.
5. A chime will be heard for each remote
transmitter programmed.
6. Switch ignition OFF to exit programming mode.
7. Check all remote transmitters for
operation.
RE-SYNCRONISATION
1. PRESS and LOCK
button 5 times at 2 second intervals to synchronise
remote transmitter.
NOTE : A working remote transmitter is required
to program in additional remote transmitters.
NOTE : A maximum of 4 remote transmitters can
be programmed.