NOTE : Once STEP 2 has been completed, ALL existing remote transmitters are ERASED.

1.     OPEN the snowmobile hood and lift the air silencer/tool tray cover to access the remote start main unit.

2.     INSERT key into key switch, then in 1 second intervals turn key from OFF to ON 3 times.

3.     After 5 seconds the main unit indicator LED (RED) will illuminate and stay ON for 1 minute.

NOTE : You have 1 minute to program all transmitters.

4.     PRESS the remote transmitter button number 1 on the first remote transmitter, the LED will flash OFF once and then ON.

5.     Repeat step 4 for all remote transmitters to be programmed.

6.     TURN key to OFF position.

7.     LED will go out.

8.     Check all remote transmitters for correct operation.

NOTE : Maximum of 3 remote transmitters can be programmed.