2004 > 2010
REMOTE
CONTROL PROGRAMMING
1. Ensure all doors are closed.
2. Ensure Ignition is OFF.
3. Disconnect battery negative terminal.
4. Within 15 seconds of disconnecting terminal, connect negative terminal
and press remote control LOCK and UNLOCK buttons.
NOTE :
On some models just the UNLOCK
button for a minimum of 5 seconds.
5. The vehicle will LOCK and UNLOCK.
6. Then within 5 seconds press the LOCK
and UNLOCK buttons for a minimum of
1 second until vehicle LOCKS and UNLOCKS
NOTE :
On some models just the UNLOCK.
7. If programming a second remote control repeat steps 4 to 6.
NOTE :
Maximum of 2 remotes can be programmed.