2005 > 2013
NOTE : Maximum of 4 remote
transmitters can be programmed.
1. CLOSE all doors.
2. LOCK doors using the power LOCK
button on the door.
3. Insert key into ignition and remove it 6 times within 10
seconds.
NOTE : Make sure the key is fully removed each time. Timing is also very
important during this step.
4. Insert key and turn to the ACC
position within 5 seconds and press the remote control button ONCE only, the hazards lights will
flash.
5. For additional remotes, UNLOCK
then LOCK the car using the power
switch on the door.
6. Within 5 seconds press the
additional remote ONCE only, the
hazards will flash.
6. Repeat step 5 & 6 for each
additional remote controls.
7. End procedure with ignition OFF.