1998 > 1999
1. Enter the vehicle and CLOSE
the drivers door.
2. Insert the key into the ignition lock.
3. OPEN the drivers door.
4. Turn the ignition key from the OFF
to the ON position 3 times, ending
in the OFF position within 3 seconds.
5. CLOSE and OPEN the drivers door
twice, ending in the open position within 10
seconds..
6. Wait 5 to 8 secs.
7. Turn the ignition key to the ON
and OFF position twice.
8. Remove the key from the ignition.
9. Close the drivers
door.
10. Wait for the hazard lights to flash 3 times (indicating programming
mode).
11. Press the UNLOCK button 3 times on the remote
control quickly.
12. Hazard lights will blink once to indicate successful programming of the
remote control.
13. Repeat step 11 to 12 for each extra remote control to be programmed.
14. Insert the ignition key in the ignition lock and turn the key to the ON
position.
15. The hazard lights will flash 3 times indicating the end of the
programming mode.
16. OPEN and CLOSE the drivers door.
17. Test remotes.