NOTE : If the ignition key is in the ON position during programming, then the horn is disabled.

NOTE  : If the ignition key is in the OFF position during programming, then the horn is enabled.

NOTE : The horn will sound when the LOCK button is pressed 2 times.

NOTE : All remote transmitters must be programmed at this time, otherwise they will not work.

1.    Short pin 4 to pin 8 of the OBD/DLC Diagnostic Connector.

2.    Locate the OBD port, see www.wikiobd.com for location information or download the app from the Google Play or Apple IOS Stores.

3.    The doors will LOCK and UNLOCK and operate the liftgate window release if fitted within 2 seconds.

4.    PRESS and HOLD the LOCK and UNLOCK buttons at the same time on the 1^st remote transmitter until the locks cycle from LOCK to UNLOCK.

5.    Repeat step 3 for ALL remote transmitters to be programmed.

6.    Remove the link from the OBD/DLC connector.

7.    LOCK and UNLOCK the doors to check each remote transmitter is operational.

8.    Activate the rear window release to ensure it is functional.