1.     Switch ignition from OFF to ON 4 times within 6 seconds.

2.    On the 4^th time, finish with the ignition OFF.

NOTE : The LED in the CLOCK/TRIP computer will light up to confirm programming mode.

3.    Within 20 seconds PRESS any button on the 1^st remote transmitter being programmed.

4.    The LED will flash 4 times to confirm remote transmitter is programmed.

5.    Within 20 seconds PRESS any button on the 2^nd remote transmitter being programmed.

NOTE : Repeat step 5 for up to 4 remote transmitters.

6.    Switch ignition ON.

7.    The LED will turn OFF to indicate end programming mode.