NOTE: Programming new or additional remotes transmitters deletes ALL existing programmed Remotes transmitters.

1.    ENSURE the KEY is removed from Ignition.

2.    ENSURE headlights are OFF.

3.    INSERT the key into the ignition and CYCLE from OFF to ON 3 times within 5 seconds, leaving the key in the ON position.

4.    PROG will appear on the clock display to indicate programming mode.

5.    PRESS the button on the remote transmitter to be programmed.

6.    The hazard warning lights will FLASH once.

7.    Repeat the steps 5 and 6 for any addition remote transmitters, while the PROG is displayed on the clock display.