1.    Locate the RKE programming connector in the rear trunk/boot area.

2.    It should have 2 connections and should not be plugged into anything else, and removal of the vehicle trim maybe necessary.

3.    Connect the 2 terminals together using a suitable jumper cable or connection.

4.    The Remote Keyless Entry module will cycle the locks from LOCK to UNLOCK to confirm programming mode.

5.    PRESS any button on the first remote transmitter to be programmed.

6.    The doors will cycle LOCK to UNLOCK to confirm programming.

7.    Repeat for any additional remote transmitters.

8.    REMOVE the jumper from connector.

9.    Check all remote transmitters for operation.