1996 > 1997
1. REMOVE the driver side panel, below the
instrument/dashboard cluster.
2. Find the Remote Keyless Entry Receiver ECU, and locate the GREEN programming button on the side.
3. Switch ignition ON.
4. PRESS and HOLD
the GREEN programming connector with
a pencil or appropriate tool.
5. KEEP HOLDING
the button until the EXTERIOR LIGHTS or LED on DASH PANEL are ON.
6. RELEASE
the GREEN programming button.
7. Within 5
seconds of step 6 PRESS and RELEASE the button with the dimple (Top button) on the remote
transmitter to be programmed.
8. The LED
will go out, and the system will CHIRP
once to confirm programming.
9. Repeat STEPS
4 to 8 for additional remote transmitters.
10. Switch ignition OFF to complete programming.
11. Test all remote transmitters for operation.
NOTE
: If the system CHIRPS twice repeat the procedure, but only PRESS the GREEN button
for 2 seconds.